How To Upgrade The Firmware - Allied Telesis SwitchBlade x908 Series Software Reference Manual

How to upgrade the firmware

New releases of the AlliedWare Plus OS become available regularly. Contact your customer
support representative for more information.
Step 1:
Step 2:
Note that you cannot delete the current release file.
To see how much space is free, use the command:
Step 3:
Follow the instructions in
Step 4:
Enter Global Configuration mode and enter the command:
Step 5:
Enter Privileged Exec mode and enter the command:
Step 6:
Enter Privileged Exec mode and enter the command:
C613-50007-01 REV B
Put the new release onto your TFTP server
If necessary, create space in the switch's Flash memory for the new
release
awplus# show file system
Copy the new release from your TFTP server onto the switch
"Copying with Trivial File Transfer Protocol (TFTP)" on page
Set the switch to boot from the new release
awplus(config)# boot system <filename>.rel
Check the boot settings
awplus# show boot
Reboot
awplus# reload
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Getting Started
6.11.
1.29