Show Ip Rip Database - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show ip rip
Use this command to show RIP routes.
To modify the lines displayed, use the | (output modifier token); to save the output to a file
use the > output redirection token.
Syntax
show ip rip
Exec mode and Privileged Exec mode
Mode
Example
The following output displays the RIP routing table with the destination network, nexthop and
Output
metric to reach it.
Related Commands
route
network
clear ip rip route

show ip rip database

Equivalent
Commands
show ip rip database
Use this command to display information about the RIP database.
To modify the lines displayed, use the | (output modifier token); to save the output to a file
use the > output redirection token.
Syntax
show ip rip database
Exec mode and Privileged Exec mode
Mode
Example
show ip rip
Related Commands
C613-50007-01 REV B
awplus# show ip rip
awplus#show ip rip
Codes: R - RIP, Rc - RIP connected, Rs - RIP static
C - Connected, S - Static, O - OSPF, B - BGP
Network Next Hop Metric From If Time
C 10.0.1.0/24
S 10.10.10.0/24
C 10.10.11.0/24
S 192.168.101.0/24
R 192.192.192.0/24
awplus# show ip rip database
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
1 VLAN20
1 VLAN20
1 VLAN20
1 VLAN20
1 --
RIP Commands
32.33