End; Exit - Allied Telesis SwitchBlade x908 Series Software Reference Manual

CLI Navigation Commands

end

This command returns the prompt to the Privileged Exec command mode from any other
advanced command mode.
Syntax
end
All command modes
Mode
The following example shows the use of the end command to return to the Privileged Exec
Examples
mode directly from Interface mode.
disable
Related Commands
enable

exit

exit
This command exits the current mode, and returns the prompt to the previous level. When
used in Exec mode, the exit command terminates the session.
Syntax
exit
All command modes.
Mode
The following example shows the use of exit command to exit Interface mode, and return to
Examples
Configure mode.
disable
Related Commands
enable
end
4.4
awplus# configure terminal
awplus(config)# interface VLAN1
awplus(config-if)# end
awplus#
awplus# configure terminal
awplus(config)# interface VLAN1
awplus(config-if)# exit
awplus(config)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B