Show Ip Protocols Ospf - Allied Telesis SwitchBlade x908 Series Software Reference Manual

OSPF Commands

show ip protocols ospf

Use this command to display OSPF process parameters and statistics.
To modify the lines displayed, use the | (output modifier token) ; to save the output to a file,
use the > output redirection token.
Syntax
show ip protocols ospf
Exec mode and Privileged Exec mode
Mode
Figure 36-24: Example output from the
Output
To display OSPF process parameters and statistics, use the command:
Examples
awplus#
36.78
Routing Protocol is "ospf 200"
Invalid after 0 seconds, hold down 0, flushed after 0
Outgoing update filter list for all interfaces is
Redistributed kernel filtered by filter1
Incoming update filter list for all interfaces is
Redistributing: kernel
Routing for Networks:
192.30.30.0/24
192.40.40.0/24
Routing Information Sources:
Gateway
Distance: (default is 110)
Address
show ip protocols ospf
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show ip protocols ospf
Distance Last Update
Mask Distance List
command
C613-50007-01 REV B