Show Debugging Lacp - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Link Aggregation Commands

show debugging lacp

Use this command to display the LACP debugging option set.
To modify the lines displayed, use the | (output modifier token); to save the output to a file
use the > output redirection token.
Syntax
show debugging lacp
Exec and Privileged Exec mode
Mode
Examples
Figure 21-2: Example output from the show debugging lacp command
Output
debug lacp
Related Commands
21.8
awplus# show debugging lacp
LACP debugging status:
LACP timer debugging is on
LACP timer-detail debugging is on
LACP cli debugging is on
LACP packet debugging is on
LACP event debugging is on
LACP sync debugging is on
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B