Default Log Console; Default Log Email - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Logging Commands

default log console

Restores the default settings for log messages sent to the terminal when a log console
command is issued. By default all messages are sent to the console when a log console
command is issued.
Syntax
default log console
Parameter
default
log
console
Global Configuration mode
Mode
To restore the log console to its default settings use the command:
Examples
awplus(config)#
show log config
Validation
Commands
log console
Related Commands
log console (filter)

default log email

Restores the default settings for log messages sent to an email address. By default no filters are
defined for email addresses. Filters must be defined before messages will be sent. Also restores
the remote syslog server time offset value to local (no offset).
Syntax
default log email <email-address>
Parameter
default
log
email
<email-address>
Global Configuration mode
Mode
To restore the default settings for log messages sent to the email address
Examples
admin@alliedtelesis.com use the command:
awplus(config)#
show log config
Validation
Commands
10.6
Description
Restore default settings
Logging control
Store log messages in a RAM buffer
default log console
Description
Restore default settings
Logging control
Send log messages to an email address
The email address to send log messages to
default log email admin@alliedtelesis.com
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B