Mirror Interface - Allied Telesis SwitchBlade x908 Series Software Reference Manual

mirror interface

Use this command to define a mirror port and mirrored (monitored) ports and direction of
traffic to be mirrored. The port for which you enter interface mode will be the mirror port.
The destination port is removed from all VLANs, and no longer participates in other switching.
Use the no parameter with this command to disable port mirroring by the destination port on
the specified source port.
Syntax
mirror interface <source-port-list> direction {both|receive|transmit}
no mirror interface <source-port-list>
Parameter
<source-port-list>
direction
both
receive
transmit
Interface mode
Mode
Use this command to send traffic to another device connected to the mirror port for
Usage
monitoring.
See
A mirror port cannot be associated with a VLAN. If a switch port is configured to be a mirror
port, it is automatically removed from any VLAN it was associated with.
This command can only be applied to a single mirror (destination) port, not to a range of ports
nor to a static or dynamic channel group. Do not apply multiple interfaces with an interface
command before issuing the mirror interface command. One interface may have multiple
mirror interfaces.
To mirror traffic received and transmitted on ports 1.1.4 and 1.1.5 to destination port 1.1.3, use
Example
the commands:
C613-50007-01 REV B
Description
The source switch ports to mirror. A port-list can be:
■
■
■
The source port list cannot include dynamic or static channel
groups (link aggregators).
Specifies whether to mirror traffic that the source port receives,
transmits, or both.
Mirroring traffic both received and transmitted by the source
port..
Mirroring traffic received by the source port.
Mirroring traffic transmitted by the source port..
"Port Mirroring" on page 14.17.
awplus(config)#
awplus(config-if)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
a port (e.g. port1.2.12)
a continuous range of ports separated by a hyphen,
e.g. port1.0.1-1.0.24 or port1.1.1-port1.1.24
a comma-separated list of ports and port ranges,
e.g. port1.0.1,port1.1.1-1.2.24
interface port1.1.3
mirror interface port1.1.4,port1.1.5
direction both
Switching Commands
15.15