Show Platform - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show platform

This command displays the settings configured using the platform commands.
Syntax
show platform
Exec and Privileged Exec modes
Mode
To check whether the device accepts jumbo frames, use the command:
Example
Figure 15-6: Example output from the show platform command
Output
Parameter
Control-plane-
prioritization
Jumboframe support
Enhanced mode
Vlan-stacking TPID
platform control-plane-prioritization rate
Related Commands
platform enhancedmode
platform jumboframe
platform vlan-stacking-tpid
C613-50007-01 REV B
awplus#
Control-plane-prioritization Max 60 Mbps
Jumboframe support
Enhanced mode
Vlan-stacking TPID
Meaning
Maximum traffic rate on the CPU port set using the
control-plane-prioritization rate
Whether the jumbo frames setting is enabled or disabled.
Whether the memory is arranged to store QoS traffic class
counters or in its default state. "qoscounters" indicates that it
can store the counters, while "None" indicates that it is in its
default state.
The value of the TPID set in the Ethernet type field when a a
frame has a double VLAN tag.
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show platform
off
none
0x8100
Switching Commands
platform
command.
15.31