Show Lacp-Counter; Show Lacp Sys-Id - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Link Aggregation Commands

show lacp-counter

Use this command to display the packet traffic on all ports of all present LACP aggregators, or
a given LACP aggregator.
To modify the lines displayed, use the | (output modifier token); to save the output to a file,
use the > output redirection token.
Syntax
show lacp-counter [<1-65535>]
Parameter
<1-65535>
Exec mode and Privileged Exec mode
Mode
Example
Figure 21-6: Example output from the show lacp-counter command
Output

show lacp sys-id

Use this command to display the LACP system ID and priority.
To modify the lines displayed, use the | (output modifier token); to save the output to a file,
use the > output redirection token.
Syntax
show lacp sys-id
Privileged Exec mode
Mode
Example
% System Priority: 0x8000 (32768)
% MAC Address: 00-00-cd-24-fd-29
21.12
Description
Channel-group number.
awplus#
% Traffic statistics
Port LACPDUs
Sent Recv
% Aggregator po4 (4604)
port1.0.2 0
awplus#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show lacp-counter
Marker
Sent Recv
0 0 0
show lacp sys-id
Pckt err
Sent Recv
0 0
C613-50007-01 REV B