Clear Spanning-Tree Detected Protocols (Rstp And Mstp) - Allied Telesis SwitchBlade x908 Series Software Reference Manual

clear spanning-tree detected protocols (RSTP and
MSTP)
Use this command to clear the detected protocols for a specific port, or all ports.
Use this command in RSTP or MSTP mode only.
Syntax clear spanning-tree detected protocols [interface <port>]
Parameter
<port>
Privileged Exec mode
Mode
Example
C613-50007-01 REV B
Description
The port to clear detected protocols for. The port may be a switch port
(e.g., port1.1.4), a static channel group (e.g., sa3), or an LACP channel
group (e.g., po4).
awplus# clear spanning-tree detected protocols
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Spanning Tree Commands
19.3