Log Permanent Size; Show Exception Log - Allied Telesis SwitchBlade x908 Series Software Reference Manual

log permanent size

Configures the amount of memory that the permanent log is permitted to use. Once this
memory allocation has been filled old messages will be deleted to make room for new
messages.
Syntax
log permanent size <50-250>
Parameter
log
permanent
size
<50-250>
Global Configuration mode
Mode
To allow the permanent log to use up to 100 kB of NVS use the command:
Examples
awplus(config)#
show log config
Validation
Commands
default log permanent
Related Commands
log permanent

show exception log

This command is used to display the contents of the exception log.
Note:
Syntax
show exception log
Parameter
show
exception
log
Privileged Exec Mode
Mode
C613-50007-01 REV B
Description
Logging control
Store log messages permanently in NVS
Set the maximum size of the permanent log
Size of the permanent log in kilobytes
log permanent size 100
When this command is used within a virtual chassis stack (VCS), it will display the
exception log information for all stack members.
Description
Show running system information
Display exception information
Display the exception log
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Logging Commands
10.33