Router Ipv6 Rip; Show Debugging Ipv6 Rip - Allied Telesis SwitchBlade x908 Series Software Reference Manual

RIPng Commands

router ipv6 rip

router ipv6 rip Command
Use this global command to enable a RIPng routing process.
Use the no parameter with this command to disable the RIPng routing process.
Syntax router ipv6 rip
no router ipv6 rip
Global Configuration mode
Mode
Example
awplus(config-router)#

show debugging ipv6 rip

show debugging ipv6 rip Command
Use this command to display the RIPng debugging status for the debugging options of: nsm
debugging, RIPng event debugging, RIPng packet debugging and RIPng nsm debugging.
To modify the lines displayed, use the | (output modifier token); to save the output to a file
use the > output redirection token.
Syntax
show debugging ipv6 rip
Privileged Exec mode
Mode
Use this command to display the debug status of RIPng.
Usage
Example
34.14
New vs_531 %flag
awplus#
awplus(config)#
New vs_531 %flag
awplus# show debugging ipv6 rip
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
RIPng Commands Use this global command to enable a RIPng routing process.
configure terminal
router ipv6 rip
RIPng Commands Use this command to display the RIPng debugging status for the debugging options of: nsm debugging, RIPng event debugging, RIPng packet debugging and RIPng nsm debugging.
C613-50007-01 REV B