Clear Arp-Cache - Allied Telesis SwitchBlade x908 Series Software Reference Manual

IP Addressing and Protocol Commands

clear arp-cache

This command deletes the dynamic ARP entries from the ARP cache.
To display the entries in the ARP cache, use the
entries, use the
Syntax
clear arp-cache
Privileged Exec mode
Mode
To clear the dynamic ARP entries, use the command:
Example
arp-aging-timeout
Related Commands
arp (IP address MAC address)
show arp
23.4
no arp <ip-address>
awplus# clear arp-cache
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show arp command. To remove static ARP
command.
C613-50007-01 REV B