Show Running-Config Switch - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show running-config switch

show running-config switch Command
Use this command to show the running system status and configuration details for a given
switch.
For information on output options, see
Syntax
show running-config switch <switch-protocol>
Parameter
<switch-protocol>
dot1x
mstp
rstp
stp
Privileged Exec mode and Global Configuration mode
Mode
Example
Figure 7-26: Example output from the show running-config switch command
Output
copy running-config
Related Commands
show running-config
C613-50007-01 REV B
New vs_531 %flag
Description
dot1x | mstp | rstp | stp
802.1X Port-Based Authentication
Multiple Spanning Tree Protocol (MSTP)
Rapid Spanning Tree Protocol (RSTP)
Spanning Tree Protocol (RSTP)
awplus# show running-config switch stp
!
bridge 6 ageing-time 45
bridge 6 priority 4096
bridge 6 max-age 7
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
File Management Commands Use this command to show the running system status and configuration details for a given switch.
"Controlling "show" command output" on page
File Management Commands
1.30.
7.41