Clear Bgp View - Allied Telesis SwitchBlade x908 Series Software Reference Manual

clear bgp view

Use this command to reset all BGP connections.
Syntax clear bgp view <word> * [<soft>]
Parameter
*
<word>
<soft>
in
out
Privileged Exec mode
Mode
Example
C613-50007-01 REV B
Description
Clears all bgp peers
Name of the BGP view
soft [in |out]
Soft inbound reset causes the neighbors to resend all their updates to the
local switch, without resetting the connection or clearing the entries in the
local switch. So, the local switch stores new updates, and uses them to
systematically replace existing table entries. This process can use a
considerable amount of memory.
Soft outbound reset causes the switch to simply resend all its updates to
the specified neighbor(s), without resetting the connection, or clearing
table entries.
awplus# clear bgp view instance1 * soft in
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
BGP Commands
38.35