Chapter 21. Link Aggregation Commands; Introduction; Clear Lacp Counters - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Link Aggregation Commands

Introduction

This chapter provides an alphabetical reference for static link aggregation (static channel group)
commands and dynamic link aggregation (LACP channel group) commands. Link aggregation is
also sometimes referred to as channelling.
For a description of static and dynamic link aggregation (LACP), see
Aggregation)" on page
Aggregation

clear lacp counters

Use this command to clear all counters of all present LACP aggregators (channel groups) or a
given LACP aggregator.
Syntax clear lacp [<1-65535>] counters
Parameter
<1-65535>
Privileged Exec mode
Mode
Example
awplus#
21.2
14.11. For an LACP configuration example, see
Configuration.
Description
Channel-group number.
clear lacp 2 counters
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
"Channel Groups (Link
Chapter 20, Link
C613-50007-01 REV B