Clear Ip Bgp View - Allied Telesis SwitchBlade x908 Series Software Reference Manual

clear ip bgp view

Use this command to reset connections with all the neighbors within the specified view.
The specified bgp view for this command is created using the
Syntax
clear ip bgp view <word> * [<in>|<soft>]
clear ip bgp view <word> * ipv4 <prefix> <routes>
Parameter
view
<word>
*
ipv4
<routes>
<in>
in
prefix-filter
out
<soft>
in
out
<prefix>
unicast
multicast
Privileged Exec mode
Mode
Example
awplus#
awplus#
router bgp view
Related Commands
C613-50007-01 REV B
Description
Specifies BGP view
Specifies the name of the view for which all routes will be cleared
Clears all peers
Clears all IPv4 address family peers. Configure parameters relating to the
BGP exchange of IPv4 prefixes.
{<in>|out|soft}
in [prefix-filter]
Indicates that incoming advertised routes will be cleared
Specifies that a prefix-list will be sent, by the ORF mechanism, to those
neighbors with which the ORF capability has been negotiated. The
neighbors will be triggered to resend updates, which match the prefix-list
filter, to the local router. The local router will then perform a soft
reconfiguration.
Indicates that outgoing advertised routes will be cleared.
soft [in |out]
Soft inbound reset causes the neighbors to resend all their updates to the
local switch, without resetting the connection or clearing the entries in the
local switch. So, the local switch stores new updates, and uses them to
systematically replace existing table entries. This process can use a
considerable amount of memory.
Soft outbound reset causes the switch to simply resend all its updates to
the specified neighbor(s), without resetting the connection, or clearing
table entries.
{unicast|multicast}
unicast address family modifier. Configure parameters relating to the BGP
exchange of routes to unicast destinations.
multicast address family modifier. Configure parameters relating to the
BGP exchange of routes to multicast sources.
clear ip bgp view I4 * in prefix-filter
clear ip bgp view I2 ipv4 unicast soft in
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
BGP Commands
router bgp view command.
38.43