Show Ip Interface Brief - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show ip interface brief

Use this command to display brief information about interfaces and the IP addresses assigned
to them. To display information about a specific interface, specify the interface name with the
command.
To modify the lines displayed, use the | (output modifier token); to save the output to a file, use
the > (output redirection token).
Syntax show ip interface [<interface-list>] [brief]
Parameter
<interface-list>
Exec mode and Privileged Exec mode
Mode
To show brief information for the assigned IP address for interface port1.0.2 use the command:
Examples
To show the IP addresses assigned to vlan2 and vlan3, use the command:
Interface
vlan2
vlan3
Figure 23-5: Example output from the
Output
C613-50007-01 REV B
Description
The interfaces to display information about. An interface-list can be:
an interface, e.g. vlan2
■
a continuous range of interfaces separated by a hyphen,
■
e.g. vlan2-8 or vlan2-vlan5
a comma-separated list of interfaces or interface ranges,
■
e.g. vlan2,vlan5,vlan8-10
The specified interfaces must exist.
awplus#
awplus#
Interface
port1.0.2
vlan1
vlan2
vlan3
vlan8
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show ip interface port1.0.2 brief
show ip interface vlan2-3 brief
IP-Address Status
unassigned admin up
192.168.6.6 admin up
show ip interface
IP-Address Status
unassigned admin up
192.168.1.1 admin up
192.168.2.1 admin up
192.168.3.1 admin up
unassigned admin up
IP Addressing and Protocol Commands
Protocol
down
down
brief command
Protocol
down
running
running
running
down.
23.35