Interface Commands
mtu
Use this command to set the Maximum Transmission Unit (MTU) size for a VLAN interface.
Use the no command to remove a previously specified Maximum Transmission Unit (MTU)
size for a VLAN interface.
Syntax
mtu <mtu_size>
no mtu
Parameter
<mtu_size>
Interface mode
Command Mode
Example
12.4
Description
<64-9208>
Specifies size of the VLAN Maximum Transmission Unit (MTU) in bytes.
awplus#
configure terminal
awplus(config)#
interface vlan1
awplus(config-if)#
mtu 1024
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
C613-50007-01 REV B