Show Running-Config Switch Lacp; Show Running-Config Switch Radius-Server - Allied Telesis SwitchBlade x908 Series Software Reference Manual

File Management Commands

show running-config switch lacp

show running-config switch lacpCommand
Use this command to show the running system LACP related configuration.
For information on output options, see
Syntax show running-config switch lacp
Privileged Exec mode and Global Configuration mode
Mode
Example
Figure 7-27: Example output from the show running-config switch lacp command
Output
copy running-config
Related Commands
show running-config

show running-config switch radius-server

show running-config switch radius-serverCommand
Use this command to show the running system radius-server related configuration.
For information on output options, see
Syntax
show running-config switch radius-server
Privileged Exec mode and Global Configuration mode
Mode
Example
Figure 7-28: Example output from the show running-config switch radius-server.
Output
command
copy running-config
Related Commands
show running-config
7.42
New vs_531 %flag
awplus# show running-config switch lacp
!
lacp system-priority 23
!
New vs_531 %flag
awplus# show running-config switch radius-server
!
radius-server key abc
!
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
File Management Commands Use this command to show the running system LACP related configuration.
"Controlling "show" command output" on page
File Management Commands Use this command to show the running system radius-server related configuration.
"Controlling "show" command output" on page
1.30.
1.30.
C613-50007-01 REV B