Show Log Config - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show log config

Related Commands
show log permanent
show log config
Displays information about the logging system. This includes the configuration of the various log
destinations, buffered, permanent, syslog servers (hosts) and email addresses. It also displays the
latest status information for each of these destinations.
Syntax show log config
Parameter
show
log
config
Privileged Exec and Global Configuration mode
Mode
To display the logging configuration use the command:
Examples
Buffered log:
Status ......... enabled
Maximum size ... 50kb
Filters:
*1 Level ...... notices
Program .... any
Facility ... any
Msg text ... any
Statistics ..... 17 messages received, 0 accepted by filter (1977 Nov 23
10:42:11)
Permanent log:
Status ......... enabled
Maximum size ... 50kb
Filters:
*1 Level ...... warnings
Program .... any
Facility ... any
Msg text ... any
Statistics ..... 17 messages received, 0 accepted by filter (1977 Nov 23
10:42:11)
Terminal log:
Filters:
*1 Level ...... debugging
Program .... any
Facility ... any
Msg text ... any
Statistics ..... Not available
Console log:
Status ......... enabled
List of consoles:
1 .............. ttyS0
Filters:
*1 Level ...... critical
Program .... any
Facility ... any
Msg text ... any
Statistics ..... 17 messages received, 0 accepted (1977 Nov 23 10:42:11)
C613-50007-01 REV B
Description
Show running system information
Display logging information
Display the current logging configuration
awplus# show log config
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Logging Commands
10.35