Debug Ospf Packet - Allied Telesis SwitchBlade x908 Series Software Reference Manual

debug ospf packet

This command enables debugging options for OSPF packets.
To enable all debugging options, specify debug ospf packet with no additional parameters.
The no and undebug form disables OSPF packet debugging. Use this command without
parameters to disable all options.
Syntax
debug ospf packet [dd] [detail] [hello] [ls-ack] [ls-request]
no debug ospf packet [dd] [detail] [hello] [ls-ack] [ls-request]
undebug ospf packet [dd] [detail] [hello] [ls-ack] [ls-request]
Parameter
dd
detail
hello
ls-ack
ls-request
ls-update
recv
send
Privileged Exec mode and Global Configuration mode
Mode
Examples
terminal monitor
Related Commands
C613-50007-01 REV B
[ls-update] [recv] [send]
[ls-update] [recv] [send]
[ls-update] [recv] [send]
Description
Specifies debugging for OSPF database descriptions.
Sets the debug option to detailed information.
Specifies debugging for OSPF hello packets.
Specifies debugging for OSPF link state acknowledgments.
Specifies debugging for OSPF link state requests.
Specifies debugging for OSPF link state updates.
Specifies the debug option set for received packets.
Specifies the debug option set for sent packets.
awplus# debug ospf packet detail
awplus# debug ospf packet dd send detail
awplus# no debug ospf packet ls-request recv
detail
awplus# undebug ospf packet ls-request recv
detail
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
OSPF Commands
36.21