Banner Login - Allied Telesis SwitchBlade x908 Series Software Reference Manual

System Configuration and Monitoring Commands

banner login

This command configures the login banner that is displayed on the console when you login. The
login banner is displayed on all connected terminals. The login banner is displayed after the
MOTD (Message-of-the-Day) banner and before the login username and password prompts.
Use the no banner login command to disable the login banner.
Syntax
banner login
no banner login
Global Configuration mode
Mode
By default, no login banner is displayed at console login.
Default
To configure a login banner to be displayed when you login, issue the following commands:
Example
To remove the login banner, issue the following commands:
:
banner exec
Related Commands
banner motd
8.4
awplus#configure terminal
awplus(config)#banner login
Type CNTL/D to finish.
authorised users only
awplus(config)#exit
awplus#exit
authorised users only
awplus login: manager
Password:
AlliedWare Plus (TM) 5.3.1 11/14/08 13:03:59
awplus>
awplus#configure terminal
awplus(config)#no banner login
awplus(config)#exit
awplus#exit
awplus login: manager
Password:
awplus>
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B