Clear Bgp Peer-Group - Allied Telesis SwitchBlade x908 Series Software Reference Manual

BGP Commands

clear bgp peer-group

Use this command to reset the BGP connection for all members of a peer group.
Syntax clear bgp peer-group <word> [<in>|out|<soft>]
Parameter
peer-group
<word>
<in>
in
out
<soft>
in
out
Privileged Exec mode
Mode
Example
awplus#
awplus#
38.34
Description
clears all members of a peer group
Name of the BGP peer group
in [prefix-filter]
Indicates that incoming advertised routes will be cleared.
indicates that outgoing advertised routes will be cleared
soft [in |out]
Soft inbound reset causes the neighbors to resend all their updates to
the local switch, without resetting the connection or clearing the entries
in the local switch. So, the local switch stores new updates, and uses
them to systematically replace existing table entries. This process can use
a considerable amount of memory.
Soft outbound reset causes the switch to simply resend all its updates to
the specified neighbor(s), without resetting the connection, or clearing
table entries.
clear bgp peer-group P1 soft in
clear bgp ipv6 peer-group P2 in
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B