No Debug All; Max-Fib-Routes - Allied Telesis SwitchBlade x908 Series Software Reference Manual

System Configuration and Monitoring Commands

no debug all

This command disables the debugging facility for all features on your device. This stops the
device from generating any diagnostic debugging messages.
The debugging facility is disabled by default.
Syntax no debug all
Global Configuration mode and Privileged Exec mode.
Mode
To disable debugging facility for all features, use the command:
Example

max-fib-routes

Use this command to set the maximum number of fib (forwarding information base) routes,
excluding static routes. Note that static routes are set and reset using max-static-routes.
Use the no max-fib-routes command to set the maximum number of fib routes to the default
value of 4294967294 fib routes.
Syntax
max-fib-routes <1-4294967294>
no max-fib-routes
Global Configuration mode
Mode
The default number of fib routes is the maximum number of fib routes (4294967294).
Mode
To reset the maximum number of forwarding information base routes issue the command:
Example
max-static-routes
Related Commands
8.12
awplus# no debug all
awplus# configure terminal
awplus(config)# no max-fib-routes
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B