Bgp Aggregate-Nexthop-Check - Allied Telesis SwitchBlade x908 Series Software Reference Manual
Switchblade x908/x900 series alliedware plus operating system software reference for version 5.3.1
Hide thumbs
Also See for SwitchBlade x908 Series:
- Hardware reference manual (65 pages) ,
- Software manual (56 pages) ,
- Installation and safety manual (55 pages)
Table of Contents
Advertisement
BGP Commands
bgp aggregate-nexthop-check
This command enables the BGP option to perform aggregation only when next-hop matches
the specified IP address. By default this is disabled.
The no form disable this function.
Syntax
bgp aggregate-nexthop-check
no bgp aggregate-nexthop-check
Global Configuration mode
Mode
Example
awplus(config)#
38.6
awplus#
configure terminal
bgp aggregate-nexthop-check
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
C613-50007-01 REV B
- Quick Links:
- Thrash-Limiting
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
