Show Memory Allocations - Allied Telesis SwitchBlade x908 Series Software Reference Manual

System Configuration and Monitoring Commands

show memory allocations

This command displays the memory allocations used by processes.
If entered on the stack master, this command will display corresponding memory utilization
information for all the stack members. A stack member heading will be displayed to distinguish
the different lists for every stack member.
If it is entered on a specific stack member, as host-directed commands, it will display
corresponding memory utilization information for that stack member.
Syntax show memory allocations [<process>]
Parameter
<process>
Exec mode and Privileged Exec mode
Mode
To display the memory allocations used by all processes on your device, use the command:
Example
To display the memory allocations used by BGP, use the command:
Figure 8-5: Example output from the show memory allocations command
Output
Parameter
name
pid
size
peak
data
stack
show memory
Related Commands
show memory history
show memory pools
8.24
Description
Displays the memory allocation used by the specified process.
awplus# show memory allocations
awplus# show memory allocations bgp
Memory allocations for BGP
----------------------------
name bgpd; pid 1155; size 2860; peak 8988; data 2360; stack 84
LDP Id
filename:line allocated
+ lib.c:614
=============
296
Memory diagnostics
filename:line allocated
+ gmem_diag.c:149
+ gmem_diag.c:199
=============
4860
Meaning
Short name used to describe the process.
Identifier number for the process.
Amount of memory in kB used by the process.
The peak amount of memory in kB ever used by the process.
Amount of memory used for data.
The stack size.
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
freed
296
freed
1820
3024
C613-50007-01 REV B