Overflow Database External - Allied Telesis SwitchBlade x908 Series Software Reference Manual

overflow database external

Use this command to configure the size of the external database and the time the router waits
before it tries to exit the overflow state.
Use the no parameter with this command to revert to default.
Syntax
overflow database external <max_lsas> <recover_time>
no overflow database external
Parameter
<max_lsas>
<recover_time>
Router mode
Mode
Use this command to limit the number of AS-external-LSAs a router can receive, once it is in
Usage
the wait state. It takes the number of seconds specified as the <recover-time> to recover
from this state.
The following example shows setting the maximum number of LSAs to 5 and the time to
Examples
recover from overflow state to be 3:
awplus(config-router)#
C613-50007-01 REV B
Description
<0-2147483647> The maximum number of Link State
Advertisements (LSAs). Note that this value should be the same on all
routers in the AS.
<0-65535> the number of seconds the router waits before trying to
exit the database overflow state. If this parameter is 0, router exits the
overflow state only after an explicit administrator command.
awplus# configure terminal
awplus(config)# router ospf 100
overflow database external 50 3
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
OSPF Commands
36.51