Clear Ip Bgp (Asn) - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Switchblade x908/x900 series alliedware plus operating system software reference for version 5.3.1
Hide thumbs Also See for SwitchBlade x908 Series:
Table of Contents

Advertisement

BGP Commands

clear ip bgp (ASN)

Use this command to reset the BGP connections to all peers in a specified Autonomous
System Number (ASN).
Syntax
clear ip bgp <asn> [<in>|out|<soft>]
clear ip bgp <asn> ipv4 <prefix> <routes>
Parameter
<asn>
ipv4
<routes>
<in>
in
prefix-filter
out
<soft>
in
out
<prefix>
unicast
multicast
Privileged Exec mode
Mode
Example
awplus#
awplus#
38.40
Description
<1-65535> Specifies the AS Number for which all routes will be
cleared
Clears all IPv4 address family peers. Configure parameters relating
to the BGP exchange of IPv4 prefixes.
{<in>|out|soft}
in [prefix-filter]
Indicates that incoming advertised routes will be cleared
Specifies that a prefix-list will be sent, by the ORF mechanism, to
those neighbors with which the ORF capability has been
negotiated. The neighbors will be triggered to resend updates,
which match the prefix-list filter, to the local router. The local
router will then perform a soft reconfiguration.
Indicates that outgoing advertised routes will be cleared.
soft [in |out]
Soft inbound reset causes the neighbors to resend all their updates
to the local switch, without resetting the connection or clearing the
entries in the local switch. So, the local switch stores new updates,
and uses them to systematically replace existing table entries. This
process can use a considerable amount of memory.
Soft outbound reset causes the switch to simply resend all its
updates to the specified neighbor(s), without resetting the
connection, or clearing table entries.
{unicast|multicast}
unicast address family modifier. Configure parameters relating to
the BGP exchange of routes to unicast destinations.
multicast address family modifier. Configure parameters relating to
the BGP exchange of routes to multicast sources.
clear ip bgp 100
clear ip bgp 200 ipv4 unicast in prefix-filter
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
C613-50007-01 REV B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents