Show Running-Config Ipv6 Route; Show Running-Config Key Chain - Allied Telesis SwitchBlade x908 Series Software Reference Manual

File Management Commands

show running-config ipv6 route

show running-config ipv6 routeCommand
Use this command to show the running system static ip routes configuration.
For information on output options, see
Syntax show running-config ipv6 route
Privileged Exec mode and Global Configuration mode
Mode
Example
Figure 7-20: Example output from the show running-config ipv6 route command
Output
copy running-config
Related Commands
show running-config

show running-config key chain

show running-config key chainCommand
Use this command to show the running system key-chain related configuration.
For information on output options, see
Syntax
show running-config key chain
Privileged Exec mode and Global Configuration mode
Mode
Example
Figure 7-21: Example output from the show running-config key chain command
Output
copy running-config
Related Commands
show running-config
7.36
New vs_531 %flag
awplus# show running-config ipv6 route
!
ip route 192.168.1.2/24 vlan2
!
New vs_531 %flag
awplus# show running-config key chain
!
key chain 12
key 2
key-string 234
!
key chain 123
key 3
key-string 345
!
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
File Management Commands Use this command to show the running system static ip routes configuration.
"Controlling "show" command output" on page
File Management Commands Use this command to show the running system key-chain related configuration.
"Controlling "show" command output" on page
1.30.
1.30.
C613-50007-01 REV B