Platform Load-Balancing - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Switchblade x908/x900 series alliedware plus operating system software reference for version 5.3.1
Hide thumbs Also See for SwitchBlade x908 Series:
Table of Contents

Advertisement

platform load-balancing

This command selects which packet fields are used in the channel load balancing algorithm.
Use the no platform load-balancing command to restrict the default choice of packet
fields in the channel load balancing algorithm.
The load balancing algorithm determines the member port of a channel group when the packet
is destined for a port within a channel.
When Layer 4 (src-dst-port) is enabled then Layer 3 (src-dst-ip) header information is also
used to hash traffic to a port in the channel. When traffic is routed at Layer 3 to a channel
group then only Layer 3 header information is used to hash traffic to the ports in the channel
group, irrespective of whether src-dst-mac, src-dst-ip or src-dst-port is enabled.
Syntax
platform load-balancing {src-dst-mac|src-dst-ip|src-dst-port}
no platform load-balancing {src-dst-mac|src-dst-ip|src-dst-port}
Parameter
src-dst-mac
src-dst-ip
src-dst-port
Global Configuration mode
Mode
The default is src-dst-mac and src-dst-ip
Default
To set the load balancing algorithm to include layer 2 MAC information:
Example
To set the load balancing algorithm to exclude layer 2 MAC information:
To set the load balancing algorithm to include layer 3 IP information:
To set the load balancing algorithm to exclude layer 3 IP information:
To set the load balancing algorithm to include layer 4 port information:
To set the load balancing algorithm to exclude layer 4 port information:
C613-50007-01 REV B
[src-dst-mac|src-dst-ip|src-dst-port]
[src-dst-mac|src-dst-ip|src-dst-port]
Description
Include Source and Destination MAC data (Layer 2)
Include Source and Destination IP data (Layer 3)
Include Source and Destination TCP/UDP port data (Layer 4)
awplus(config)#
awplus(config)#
awplus(config)#
awplus(config)#
awplus(config)#
awplus(config)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
platform load-balancing src-dst-mac
no platform load-balancing src-dst-mac
platform load-balancing src-dst-ip
no platform load-balancing src-dst-ip
platform load-balancing src-dst-port
no platform load-balancing src-dst-port
Switching Commands
15.21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents