Show Ip Bgp Longer-Prefixes - Allied Telesis SwitchBlade x908 Series Software Reference Manual

BGP Commands

show ip bgp longer-prefixes

Use this command to display the route of the local BGP routing table for a specific prefix with
a specific mask or for any prefix having a longer mask than the one specified.
Syntax
show ip bgp <ip-address/m> longer-prefixes
show ip bgp <prefix> <ip-address/m> longer-prefixes
Parameter
<prefix>
unicast
multicast
<ip-address/m>
Privileged Exec mode and Exec mode
Mode
Example
38.110
Description
{multicast|unicast}
Specifies a IPv4 unicast address family. This is the default option.
Configures parameters relating to the BGP exchange of routes to unicast
destinations.
Specifies a IPv4 multicast address family. Configures parameters relating to
the BGP exchange of routes to source addresses of multicast streams.
Neighbor's IP address and subnet mask, entered in the form A.B.C.D/M.
Where M is the subnet mask length.
awplus# show ip bgp 10.10.0.10/24 longer-prefixes
awplus# show ip bgp multicast 3.3.3.3/16 longer-prefixes
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B