Switching Commands
show mirror interface
Use this command to display port mirroring configuration for a mirrored (monitored) switch
port.
Syntax
show mirror interface <port>
Parameter
<port>
Interface, Privileged Exec and Exec mode
Mode
To display port mirroring configuration for the port1.0.4, use the command:
Example
Figure 15-5: Example output from the
Output
15.30
Description
The monitored switch port to display information about.
awplus(config-if)#
Mirror Test Port Name: port1.0.3
Mirror option: Enabled
Mirror direction: both
Monitored Port Name: port1.0.4
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
show mirror interface port1.0.4
show mirror interface
command
C613-50007-01 REV B