Show Running-Config Router - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show running-config router

show running-config router Command
Use the show running-config router command to display the current running configuration for a
given router.
For information on output options, see
Syntax
show running-config router <protocol>
Parameter
<router-protocol>
bgp
ospf
rip
ipv6 rip
vrrp
Privileged Exec mode and Global Configuration mode
Mode
Example
Figure 7-24: Example output from the show running-config router command
Output
copy running-config
Related Commands
show running-config
C613-50007-01 REV B
New vs_531 %flag
Description
bgp | ospf | rip |ipv6 rip | vrrp
Border Gateway Protocol (BGP)
Open Shortest Path First (OSPF)
Routing Information Protocol (RIP)
rip IPv6 RIP
Virtual Redundancy Routing Protocol (VRRP)
awplus# show running-config router bgp
!
router bgp 1
network 172.1.0.0/16
neighbor 10.10.10.1 remote-as 1
!
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
File Management Commands Use the show running-config router command to display the current running configuration for a given router.
"Controlling "show" command output" on page
File Management Commands
1.30.
7.39