Show Memory - Allied Telesis SwitchBlade x908 Series Software Reference Manual

System Configuration and Monitoring Commands

show memory

This command displays the memory used by each process that is currently running.
If this commands is entered on the stack master, it will display corresponding memory
utilization information for all the stack members. A stack member heading will be displayed to
distinguish the different lists for every stack member.
If it is entered on a specific stack member, as host-directed commands, it will display
corresponding memory utilization information for that stack member.
Syntax show memory [sort {size|peak|stk}]
Parameter
sort
Exec mode and Privileged Exec mode
Mode
To display the memory used by the current running processes, use the command:
Example
Figure 8-4: Example output from the show memory command
Output
8.22
Description
Changes the sorting order for the list of processes. If you do not specify
this, then the list is sorted by percentage memory utilization.
size
peak
stk
awplus#
RAM total: 514920 kB; free: 382716; buffers: 16368 kB
user processes
==============
pid name
962 pss
1 init
797 syslog-ng
803 klogd
843 inetd
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Sorts the list by the amount of memory the process is
currently using.
Sorts the list by the peak amount of memory the
process has ever used.
Sorts the list by the stack size of the process.
show memory
mem% size peak
6 33112 36260
0 348 1092
0 816 2152
0 184 1244
0 256 1256
data stk
27696 244
288 84
752 84
124 84
136 84
C613-50007-01 REV B