Log Buffered Size - Allied Telesis SwitchBlade x908 Series Software Reference Manual

To add a filter to send all messages generated by BGP that have a severity of "notices" or higher
Examples
to the buffered log use the command:
awplus(config)#
To add a filter to send all messages containing the text "Bridging initialization", to the buffered
log use the command:
awplus(config)#
To remove a filter that sends all messages generated by BGP that have a severity of "notices" or
higher to the buffered log use the command:
awplus(config)#
To remove a filter that sends all messages containing the text "Bridging initialization", to the
buffered log use the command:
awplus(config)#
show log config
Validation
Commands
default log buffered
Related Commands
log buffered

log buffered size

log buffered size
Configures the amount of memory that the buffered log is permitted to use. Once this memory
allocation has been filled old messages will be deleted to make room for new messages.
Syntax
log buffered size <50-250>
Parameter
log
buffered
size
<50-250>
Global Configuration mode
Mode
To allow the buffered log to use up to 100 kB of RAM use the command:
Examples
awplus(config)#
show log config
Validation
Commands
default log buffered
Related Commands
log buffered
C613-50007-01 REV B
log buffered level notices program bgp
log buffered msgtext Bridging initialization
no log buffered level notices program bgp
no log buffered msgtext Bridging initialization
Description
Logging control
Store log messages in a RAM buffer
Set the maximum size of the RAM log
Size of the RAM log in kilobytes
log buffered size 100
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Logging Commands
10.13