Show System Pci Device - Allied Telesis SwitchBlade x908 Series Software Reference Manual

System Configuration and Monitoring Commands

show system pci device

Use this command to display the PCI devices on your switch.
Syntax
show system pci device
Parameter
show
system
pci
device
Exec mode and Privileged Exec mode
Mode
To display information about the PCI devices on your switch, use the command:
Example
Figure 8-13: Example output from the show system pci device command
Output
awplus>show system pci device
00:0c.0 Class 0200: 11ab:00d1 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 128, IRQ 113
Memory at 5ffff000 (32-bit, non-prefetchable) [size=4K]
Memory at 58000000 (32-bit, non-prefetchable) [size=64M]
00:0d.0 Class 0200: 11ab:00d1 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 128, IRQ 116
Memory at 57fff000 (32-bit, non-prefetchable) [size=4K]
Memory at 50000000 (32-bit, non-prefetchable) [size=64M]
show system environment
Related Commands
show system pci tree
8.34
Description
Show running system information
System properties
PCI information
PCI device list
awplus# show system pci device
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B