Log Host - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Logging Commands

log host

Configures the device to send log messages to a remote syslog server via UDP port 514. The IP
address of the remote server must be specified. By default no filters are defined for remote
syslog servers. Filters must be defined before messages will be sent.
Syntax
log host <ip-address>
no log host <ip-address>
Parameter
log
host
<ip-address>
Global Configuration mode
Mode
To configure the device to send log messages to a remote syslog server with IP address
Examples
10.32.16.99 use the command:
awplus(config)#
To stop the device from sending log messages to the remote syslog server with IP address
10.32.16.99 use the command:
awplus(config)#
show log config
Validation
Commands
default log host
Related Commands
10.22
Description
Logging control
Send log messages to a remote syslog server
The IP address of a remote syslog server, entered in format A.B.C.D
log host 10.32.16.99
no log host 10.32.16.99
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B