Start-Up Sequence - Allied Telesis SwitchBlade x908 Series Software Reference Manual

6.
The system information option provides some details on the hardware platform in use, such as
CPU, memory, hardware (MAC) address and so on.
System information:
System (Detected values)
------------------------------------------------------
CPU:
Type ...............: MPC8541E
Speed ..............: 666 MHz
Memory:
Total installed ....: 512 MB
Speed ..............: 133 MHz
Flash:
Total installed ....: 32 MB
------------------------------------------------------
Product information
------------------------------------------------------
Compatible software ..: 1 (r1)
Serial ...............: 45AX5300X
Manufacture date .....: 03/2005
Product ..............: 280
Product name .........: x900-24XT-N
Revision .............: A
First MAC address ....: 00:00:CD:23:55:C8
------------------------------------------------------
Boot software information
------------------------------------------------------
Version ..............: 1.0.9
Build time ...........: Aug
Built by .............: matthewm
Build host ...........: matthewm-dl
Build key ............: at9924ts
Compatible products:
255 ................: AT-9924Ts
256 ................: AT-9924SPs
270 ................: x900-24XT
271 ................: x900-24XS
280 ................: x900-24XT-N
287 ................: x900-12XT/S
------------------------------------------------------
Press any key to continue...
7.
This option allows the bootloader to be set back to factory defaults
Warning This option erases any settings that may have been
configured by this menu
Are you sure? (Y/N) ==>
The bootloader menu provides a powerful set of options for flexibility in the way software
releases are upgraded on the switch, and system recovery is performed.
C613-50007-01 REV B
System information
3 2007 - 09:07:12
Restore Bootloader factory settings
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1

Start-up Sequence

3.7