Router Rip - Allied Telesis SwitchBlade x908 Series Software Reference Manual

RIP Commands

router rip

Use this global command to enable the RIP routing process.
Use the no parameter with this command to disable the RIP routing process.
Syntax
router rip
no router rip
Global Configuration mode
Mode
This command is used to begin the RIP routing process:
Example
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
awplus(config-router)#
network
Related Commands
version
32.30
awplus# configure terminal
awplus(config)# router rip
version 1
network 10.10.10.0/24
network 10.10.11.0/24
neighbor 10.10.10.10
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B