Getting Started
How to undo settings
There are two possibilities for undoing settings: the no parameter and the default parameter.
How to use the no parameter
To undo most settings, simply re-enter the first parameters of the configuration command with
the parameter no before them.
Example
You can set the timezone to Eastern Standard Time by entering the command:
To remove the timezone setting, enter the command:
How to use the default parameter
Some commands have a default parameter that returns the feature to its default setting.
Example
You can change the login banner to "this is a new banner" by entering the command:
To return to the default banner, enter the command:
Note that this command also has a no parameter that lets you remove the banner altogether.
1.28
awplus(config)#
clock timezone EST minus 5
awplus(config)#
no clock timezone
awplus(config)#
banner motd this is a new banner
awplus(config)#
banner motd default
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
C613-50007-01 REV B