Introduction - Allied Telesis SwitchBlade x908 Series Software Reference Manual

RIP Commands

Introduction

This chapter provides an alphabetized reference for each of the RIP Commands.
accept-lifetime
Use this command to specify the time period during which the authentication key on a key
chain is received as valid.
Use the no accept-lifetime command to remove a specified time period for an
authentication key on a key chain as set previously with the accept-lifetime command.
Syntax
accept-lifetime <start-date>{<end-date>|duration <seconds>|infinite}
no accept-lifetime
Parameter Description
<start-
date>
<end-
date>
<seconds>
infinite
Keychain-key mode
Mode
The following examples show the setting of accept-lifetime for key1 on the key chain named
Examples
mychain.
awplus(config-keychain-key)#
32.2
Specifies the start period - time and date in the format DD MMM YYYY or
MMM DD YYYY:
<hh:mm:ss> {<day> <month> <year> | <month> <day> <year>}
Time of the day when accept-lifetime starts, in hours, minutes
<hh:mm:ss>
and seconds
<day> <1-31> Specifies the day of the month to start.
<month> Specifies the month of the year to start (the first three letters
of the month, for example, Jan).
<year> <1993-2035> Specifies the year to start.
Specifies the end period - time and date in the format DD MMM YYYY or
MMM DD YYYY:
<hh:mm:ss> {<day> <month> <year> | <month> <day> <year>}
<hh:mm:ss> Time of the day when lifetime expires, in hours, minutes and
seconds.
<day> <1-31> Specifies the day of the month to expire.
<month> Specifies the month of the year to expire (the first three
letters of the month, for example, Feb).
<year> <1993-2035> Specifies the year to expire.
<1-2147483646> Duration of the key in seconds.
Never expires.
awplus#
awplus(config)#
awplus(config-keychain)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
configure terminal
key chain mychain
key 1
accept-lifetime 03:03:01 Dec 3 2007
04:04:02 Oct 6 2008
C613-50007-01 REV B