Show Ip Bgp Neighbors - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show ip bgp neighbors

Use this command to display detailed information on peering connections to all BGP neighbors.
Syntax show ip bgp neighbors [<ipaddr> [advertised-routes|<received>|
show ip bgp <prefix> neighbors [<ipaddr> [advertised-routes|
Parameter
<ipaddr>
advertised-routes
<received>
prefix-filter
received-routes
routes
<prefix>
unicast
multicast
Privileged Exec mode and Exec mode
Mode
Example
awplus#
awplus#
This is a sample output from the show ip bgp neighbors command displaying
Output
information about the specified neighbor.
C613-50007-01 REV B
received-routes|routes]]
<received>|received-routes|routes]]
Description
Specifies the IPv4 address.
Displays the routes advertised to a BGP neighbor.
received prefix-filter
Displays all received routes, both accepted and rejected.
Displays the prefix-list filter.
Displays the received routes from neighbor. To display all the
received routes from the neighbor, configure the BGP soft
reconfigure first.
Displays all accepted routes learned from neighbors.
{multicast|unicast}
Specifies a IPv4 unicast address family. This is the default option.
Configures parameters relating to the BGP exchange of routes to
unicast destinations.
Specifies a IPv4 multicast address family. Configures parameters
relating to the BGP exchange of routes to source addresses of
multicast streams.
show ip bgp neighbors 1.2.3.4 received-routes
show ip bgp ipv4 unicast neighbors 7.67.7.0 received prefix-
filter
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
BGP Commands
38.111