Ip Irdp Multicast - Allied Telesis SwitchBlade x908 Series Software Reference Manual

IP Addressing and Protocol Commands

ip irdp multicast

This command configures multicast Router Discovery advertisements on an interface. The
interface sends IRDP advertisements with the all-system multicast address (224.0.0.1) as the IP
destination address.
The no form configures broadcast Router Discovery advertisements on an interface. The
interface sends IRDP advertisements with the broadcast address (255.255.255.255) as the IP
destination address.
The multicast address is the default IP destination address for Router Discovery
advertisements.
Syntax
ip irdp multicast
no ip irdp multicast
Interface mode
Mode
To enable multicast Router Discovery advertisements on vlan5, use the commands:
Examples
awplus(config-if)#
To enable broadcast Router Discovery advertisements on vlan5, use the command:
awplus(config-if)#
ip irdp
Related Commands
ip irdp broadcast
show ip irdp interface
23.24
awplus# configure terminal
awplus(config)# interface vlan5
ip irdp multicast
awplus# configure terminal
awplus(config)# interface vlan5
no ip irdp multicast
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B