Show Ip Route Database - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Routing Commands

show ip route database

This command displays the routing entries in the RIB. When multiple entries are available for
the same prefix, RIB uses the routes' administrative distances to choose the best route. All best
routes are entered into the FIB. To view the routes in the FIB, use the
To modify the lines displayed, use the | (output modifier token); to save the output to a file,
use the > output redirection token.
Syntax show ip route database [bgp|connected|ospf|rip|static]
Parameter
bgp
connected
ospf
rip
static
Exec mode and Privileged Exec mode
Mode
Figure 30-2: Example output from the
Output
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
> - selected route, * - FIB route, p - stale info
O *> 9.9.9.9/32 [110/31] via 10.10.31.16, vlan2, 00:19:21
O 10.10.31.0/24 [110/1] is directly connected, vlan2, 00:28:20
C *> 10.10.31.0/24 is directly connected, vlan2
S *> 10.10.34.0/24 [1/0] via 10.10.31.16, vlan2
O 10.10.34.0/24 [110/31] via 10.10.31.16, vlan2, 00:21:19
O *> 10.10.37.0/24 [110/11] via 10.10.31.16, vlan2, 00:21:19
C *> 10.30.0.0/24 is directly connected, vlan6
S *> 11.22.11.0/24 [1/0] via 10.10.31.16, vlan2
O E2 *> 14.5.1.0/24 [110/20] via 10.10.31.16, vlan2, 00:19:21
O 16.16.16.16/32 [110/11] via 10.10.31.16, vlan2, 00:21:19
S *> 16.16.16.16/32 [1/0] via 10.10.31.16, vlan2
O *> 17.17.17.17/32 [110/31] via 10.10.31.16, vlan2, 00:21:19
C *> 45.45.45.45/32 is directly connected, lo
O *> 55.55.55.55/32 [110/21] via 10.10.31.16, vlan2, 00:21:19
C *> 127.0.0.0/8 is directly connected, lo
The routes added to the FIB are marked with a *. When multiple routes are available for the
same prefix, the best route is indicated with the > symbol. All unselected routes have neither
the * nor the > symbol.
S
O
These route entries denote:
■
■
30.6
Description
Displays only the routes learned from BGP.
Displays only the routes learned from connected interfaces.
Displays only the routes learned from OSPF.
Displays only the routes learned from RIP.
Displays only the static routes you have configured.
*> 10.10.34.0/24 [1/0] via 10.10.31.16, vlan2
10.10.34.0/24 [110/31] via 10.10.31.16, vlan2, 00:21:19
The same prefix was learned from OSPF and from static route configuration.
Since this static route has a lower administrative distance than the OSPF route (110), the
static route (1) is selected and installed in the FIB.
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show ip route database
show ip route command.
command
C613-50007-01 REV B