Switchport Port-Security Aging - Allied Telesis SwitchBlade x908 Series Software Reference Manual

switchport port-security aging

Sets the port-security MAC to time out.
Use the no switchport port-security aging command to set the port-security to not time
out.
Syntax
switchport port-security aging
no switchport port-security aging
Parameter
no
switchport
port-security
aging
Interface Mode
Mode
To set the MAC to time out
Example
To unset the MAC time out:
C613-50007-01 REV B
Description
Negate a command or set its defaults
Set the switching characteristics of the Layer2 interface
Port-based learning limits
Enables the MAC aging
awplus# switchport port-security aging
awplus# no switchport port-security aging
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Switching Commands
15.41