Terminal Length - Allied Telesis SwitchBlade x908 Series Software Reference Manual

terminal length

Use the terminal length command to specify the number of rows of output that the device will
display before pausing, for the currently-active terminal only.
Use the terminal no length command to remove the length specified by this command. The
default length will apply unless you have changed the length for some or all lines by using the
length command on page
Syntax terminal length <length>
terminal no length [<length>]
Parameter
<length>
Exec mode and Privileged Exec mode
Mode
The following example sets the number of lines to 15.
Example
The following example removes terminal length set previously.
length
Related Commands
service terminal-length
C613-50007-01 REV B
5.6.
Description
<0-512> Number of rows that the device will display on the currently-
active terminal before pausing.
awplus# terminal length 15
awplus# terminal no length
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
User Access Commands
5.15