Clear Ipv6 Rip Route - Allied Telesis SwitchBlade x908 Series Software Reference Manual

clear ipv6 rip route

clear ipv6 rip route Command
Use this command to clear specific data from the RIPng routing table.
Syntax clear ipv6 rip route {<ipv6-addr/prefix-length>|all|connected|rip|
Parameter
<ipv6-addr/
prefix-length>
connected
static
rip
all
Privileged Exec mode
Mode
Example
C613-50007-01 REV B
New vs_531 %flag
static}
Description
Specify the IPv6 Address in format X:X::X:X/Prefix-Length. The prefix-
length is a decimal integer between 1 and 128. Removes entries which
exactly match this destination address from the RIPng routing table.
Removes redistributed connected entries from RIPng routing table.
Removes redistributed static entries from the RIPng routing table.
Removes RIPng routes from the RIPng routing table.
Clears the entire RIPng routing table.
awplus# clear ipv6 rip route all
awplus# clear ipv6 rip route 3ffe:ffff::/16
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
RIPng Commands Use this command to clear specific data from the RIPng routing table.
RIPng Commands
34.3