Private-Vlan Association - Allied Telesis SwitchBlade x908 Series Software Reference Manual

private-vlan association

Use this command to associate a secondary VLAN to a primary VLAN. Only one isolated
VLAN can be associated to a primary VLAN. Multiple community VLANs can be associated to
a primary VLAN.
Use the no form of this command to remove association of all the secondary VLANs to a
primary VLAN.
For more information, see the section
Syntax private-vlan <primary-vlan-id> association
Parameter
<primary-vlan-id>
<secondary-vlan-id>
VLAN Configuration mode
Mode
Example
C613-50007-01 REV B
{add <secondary-vlan-id> | remove <secondary-vlan-id>}
Description
VLAN ID of the primary VLAN
VLAN ID of the secondary VLAN (either isolated or community)
awplus#
awplus(config)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
"Private VLANs" on page
configure terminal
vlan database
private-vlan 2 association add 3
private-vlan 2 association remove 3
no private-vlan 2 association
VLAN Commands
16.8.
17.3