Undebug Nsm; Undebug Nsm Packet - Allied Telesis SwitchBlade x908 Series Software Reference Manual

undebug nsm

This command specifies a set of debug options for use by Allied Telesis authorized service
personnel only. This command disables the debugging option for the nsm events.
Syntax
undebug nsm [all|events]
Privileged Exec mode
Mode
show debugging nsm
Related Commands
debug nsm

undebug nsm packet

This command specifies a set of debug options for use by Allied Telesis authorized service
personnel only. This command disables the debugging option for the nsm packet.
Syntax undebug nsm packet [recv|send][detail]
Privileged Exec mode
Mode
show debugging nsm
Related Commands
debug nsm
C613-50007-01 REV B
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
System Configuration and Monitoring Commands
8.41